Heavy metal removal from waste water from wet lime(stone)—gypsum flue gas desulfurization plants

Waste water from wet lime(stone) gypsum flue gas desulfurization processes for coal-fired boilers contains suspended solids (gypsum, silica, hydroxides of iron and aluminum) and soluble salts (chlorides and sulfates of calcium, sodium and magnesium). Furthermore, small amounts of heavy metals such as As, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Se and Zn are present in these waste water streams. A treatment method has been developed to remove these heavy metals very efficiently. This method has been based on coprecipitation of metal hydroxides and sulfides. The hydroxide and sulfide precipitates are removed by a coagulation/flocculation technique followed by gravity settling. The coprecipitation can be carried out with sodium hydroxide or with lime. Both cases were investigated in two different pilot plants with synthetically composed waste water and with actual waste water from three different types of wet lime(stone)—gypsum flue gas desulfurization plants (lime—gypsum FGD plants without a prescrubber, one using seawater and another using river water as process water; a limestone—gypsum FGD plant with a prescrubber using river water as process water).     

Effect of feeding pattern and storage on the sludge settleability under aerobic conditions

The selection of filamentous bacteria is often assumed to be associated with specific microbial properties such as growth rate, substrate uptake rate, substrate affinity and potential for substrate storage. In this study we aimed to verify some of these factors. Sequencing batch reactor (SBR) systems were used to scale-down aerobic activated sludge systems with an aerobic selector. Adding acetate in different aerobic feeding periods allowed us to simulate a variable relative size of aerobic selector with different bulk liquid substrate concentrations. The experiments showed that as expected, the aerobic fill time ratio (FTR(ox)) and the corresponding feast period, which can be assumed similar to contact time in an aerobic selector, had a strong effect on the sludge settleability. Promoting a strong substrate gradient in the SBR (FTR(ox)<5.4%) resulted in good sludge settleability (SVI<120mLg(-1)). Whenever acetate was added in a limiting rate (FTR(ox)>6.2%), a condition in which the acetate concentration in the reactor was always very low, the sludge settleability decreased (SVI>150mLg(-1)). Sludge settleability could be improved by changing the feeding strategy to a pulse feed. The maximum specific acetate uptake rate and poly beta-hydroxybutyrate (PHB) production rate of bad settling sludge, including bulking sludge, was similar to well-settling sludge, which is not in accordance with the general assumptions that well settling sludge have a higher maximal substrate uptake rate and better storage capacities. An alternative hypothesis for the development of filamentous structures in biological flocs has been formulated. It is hypothesized that bulking sludge originates from the presence of substrate gradients in sludge aggregates. Whereas at low bulk liquid substrate concentration filamentous bacteria give easier access to the substrate at the outside of the flocs and thereby proliferate, at high bulk liquid substrate concentration there is no substrate advantage for filamentous organisms and smooth bacterial structures predominate. In this hypothesis there is no need for an intrinsic difference in kinetic parameters between floc and filamentous bacteria. Where presence of filamentous bacteria is related to process conditions, the presence of a specific filament is likely due to presence of a specific limiting substrate.     

Effect of alum treatment on the trihalomethane formation and bacterial regrowth potential of natural and synthetic waters

Waters from five reservoirs and "synthetic waters", prepared using terrestrially derived dissolved organic matter (DOM) extracted from vegetation and reservoir catchment soils, were studied for their treatability with alum using a jar test procedure. DOM in drinking water is a precursor for the formation of trihalomethanes (THM) following chlorine disinfection and can also be a substrate for microbial growth in the drinking water distribution system. The trihalomethane formation potential (THMFP) represents an upper concentration limit on THMs formed by chlorination, while bacterial regrowth potential (BRP) is an indicator of the bioavailability of DOM. BRP and THMFP were measured before and after alum treatment and the results were related to the source of the DOM. It was found that freshly derived terrestrial DOM in synthetic water resulted in higher THMFP and BRP than DOM in reservoir waters. For the samples investigated, conventional alum treatment did not always reduce the THM precursor levels formed in laboratory tests below the NH&MRC (1996) guideline level of 250 microg/L nor produce microbially stable waters.     

Geochemistry of trace metals in a fresh water sediment: field results and diagenetic modeling

Concentrations of Fe, Mn, Cd, Co, Ni, Pb, and Zn were determined in pore water and sediment of a coastal fresh water lake (Haringvliet Lake, The Netherlands). Elevated sediment trace metal concentrations reflect anthropogenic inputs from the Rhine and Meuse Rivers. Pore water and sediment analyses, together with thermodynamic calculations, indicate a shift in trace metal speciation from oxide-bound to sulfide-bound over the upper 20 cm of the sediment. Concentrations of reducible Fe and Mn decline with increasing depth, but do not reach zero values at 20 cm depth. The reducible phases are relatively more important for the binding of Co, Ni, and Zn than for Pb and Cd. Pore waters exhibit supersaturation with respect to Zn, Pb, Co, and Cd monosulfides, while significant fractions of Ni and Co are bound to pyrite. A multi-component, diagenetic model developed for organic matter degradation was expanded to include Zn and Ni dynamics. Pore water transport of trace metals is primarily diffusive, with a lesser contribution of bioirrigation. Reactions affecting trace metal mobility near the sediment-water interface, especially sulfide oxidation and sorption to newly formed oxides, strongly influence the modeled estimates of the diffusive effluxes to the overlying water. Model results imply less efficient sediment retention of Ni than Zn. Sensitivity analyses show that increased bioturbation and sulfate availability, which are expected upon restoration of estuarine conditions in the lake, should increase the sulfide bound fractions of Zn and Ni in the sediments.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Nanomaterials for environmental studies: Classification, reference material issues, and strategies for physico-chemical characterisation

NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions:

1.

What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies?

2.

What reference materials should be developed for use in environmental and ecotoxicological studies?

3.

Is it possible to group different nanomaterials into categories for consideration in environmental studies?

Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below.The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known.There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO₂ nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time.No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be required to derive criteria that can be used to generate such categories, that would also include aspects of the material structure and physical behaviour.     

Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.     

Global–local interaction and its impact on cities

This introduction paper to the special issue of Journal of Housing and the Built Environment explores the interrelations among ‘globalization, urban systems, and local development’ by focusing on global-local interactions and their impacts on cities. After tackling the idea that globalization is about the spread of capitalism and capitalist principles throughout the world, the paper introduces the questions that each article intends to answer. The issues addressed by these questions were grouped under four headings: global versus local forces and urban change; urban systems within the global network of cities; globalization and property markets; and governance of globalizing cities.     

Divided cities in the 21st century: challenging the importance of globalisation

In this paper the focus is on the explanation of divided cities. We will make clear that many elements of older theories are still very relevant when divisions within cities have to be explained. This is obviously still the case in a world which is described by a large number of geographers and urban sociologists as increasingly globalising. A main argument could be that in the last three decades or so the process of globalisation has become enormously influential in explaining changes within cities, but in this paper we want to modify this notion. Our argument will be that attention for globalisation is useful, but that we should never exaggerate the influence of this process in a city as a whole and in parts of that city. In other words: we want to challenge the importance of globalisation when explaining divided cities or urban change in general.

MATCHING UNEMPLOYMENT AND VACANCIES IN REGIONAL LABOR MARKETS: AN EMPIRICAL ANALYSIS FOR THE NETHERLANDS

ABSTRACT In this paper we analyze regional developments in unemployment and vacancies in the Netherlands during the 1980s. Our purpose is to establish to what extent the differences in unemployment and vacancy rates are due to difference in regional labor market performance. The analysis is carried out by considering labor market dynamics using the concept of the matching function. We find a constant returns to scale matching function with coefficients of 0.25 for unemployment and 0.75 for vacancies. Efficiency rises substantially during the recession in the beginning of the 1980s. Regional differences in efficiency appear to be small for most regions, suggesting that a reduction in regional unemployment should by stimulating regional labor demand.